粉體行業在線展覽
1164
產品介紹: NE系列板鏈式提升機 主要特點: 1、提升范圍廣。這類提升機對物料的種類、特性及塊度的要求少;可提升粉狀、粒狀和塊狀物料;可提升磨琢性的物料;可提升溫度<250度的高溫物料。 2、輸送能力大。提升量可達15-800m3/h。 3、能耗低。提升機可采用大容料斗輸送,鏈速低提升量大,無回料和挖料現象,因此驅動功率小,比環鏈式提升機節電25%-45%左右。 4、使用壽命長。輸送鏈采用板鏈式高強度耐磨鏈條,延長了鏈條的使用壽命。正常情況下,輸送鏈的使用壽命超過5年以上,運轉率接近100%。 5、提升高度高。這類提升機鏈速低,運行平穩,因此可達較高的提升高度(<40m)。 6、運行可靠。先進的設計原理,保證了整機運行的可靠性。 7、操作方便。維修量少,易損件少。 8、使用生產成本低。 9、密封性好,環境污染少。 10、機械尺寸小。與同等提升量的其他各類提升機比較,這類提升機的機械尺寸較小。 NE series chain type elevator main characteristics: 1.Wide application for many kinds of material. This kind of equipment has very low requir ements for the variety, the property and the piece size of the material , and it can elevate the powder material, the granular material and the block material , and it can also elevate the material with better grinding property and the material with the temperature less than <250 2.high elevating capacity. The elevating capacity can get to 15---800m3/h. 3.low energy consumption: this equipment can adopt the big capacity hopper to convey the material with low speed and high elevating capacity and without material returning , so its drive power is very small, it can save the energy by 25%--45% or so compared to the loop chain elevator 4.long use life: the conveying chain is plate chain type and it is a kind of anti-wear chain with high strength, so this can prolong the use life of the chain., and its use life is generally over 5 years and its operation rate is near 100%. 5.High elevating position. The chain speed of this kind of elevator is vey low and its operation is very smooth, so it can get to a higher elevating position.(,40m) 6.secure operation. Advanced design principle can guarantee its secure operation. 7.Handy operation. Low maintenance and low need for the consumable parts. 8.low production cost. 9.good seal can guarantee a low environmental pollution. 10.The external size is smaller than other kinds of elevators with the same elevating capacity.