粉體行業在線展覽
面議
531
CODE | PART NAME | REMARKS |
ACO-00-023 | aco-8 | Cleveland open Cup Flash Point Tester 克利夫蘭開口杯法閃點試驗儀 |
ACO-00-023 | aco-8as | Cleveland open Cup Flash Point Tester, asphalt version克利夫蘭開口杯法閃點試驗儀,瀝青試驗用 |
CODE | PART NAME | Qty | REMARKS |
ACO-02-001 | Test Cup Assembly油杯 | 1 | |
320-00-035 | Thermofuse 熱熔絲 | 1 | Pack of 5, with Insulating Tube.5只裝,帶絕緣管 |
Gas Hose 9 x 16, 1.5m with Hose bands帶夾箍煤氣管 | 1 | ||
ACO-04-401 | Heating Plate, Upper加熱板 | 1 | |
MPC-02-033 | AC Power Cord 電源線 | 1 | 2.5m, For 220 to 240V |
aco-8 Manuals 操作手冊 | 1 | Manuals for aco-8 | |
ACO-02-441 | Skimmer Paddle除沫片 | 3 | asphalt version only瀝青試驗專用 |
CODE | PART NAME | REMARKS |
070-00-068 | Printer, BS2-80TS 打印機 | Prints out test data and instrument settings. 打印試驗、設定數據 |
070-00-281 | Mini USB Keyboard 迷你鍵盤 | Sample ID entering 樣品名輸入 |
ACO-05-016 | Mercury Thermometer Holder 水銀溫度計夾座 | For Calibration 校準用 |
2年備件選購
CODE | PART NAME | Qty | CODE | PART NAME | Qty |
ACO-02-001 | Test Cup Assembly 油杯 | 1 | ACO-02-402 | Inner Detector Ring 閃點檢測器內環 | 1 |
320-00-035 | Thermofuse 熱熔絲 | 1 | ACO-02-403 | Outer Detector Ring 閃點檢測器外環 | 1 |
ACO-05-021 | Igniter Top for aco-8 點火頭 | 2 | 190-00-216 | Insulating Collar for aco-8 | 2 |
ACO-05-011 | Temperature Sensor for aco-8 溫度傳感器 | 1 | 100-00-011 | Heater Coil, 220/240V 800W (for 220/240V model) 加熱絲 | 1 |
ACO-02-441 | Skimmer Paddle (for aco-8as only) 除沫片(瀝青試驗專用) | 5 |
1.SINGLE ACTION SETTING 單一動作設定
The flash detector rings and the temperature sensor are permanently mounted on a swing-arm assembly, which allows an easy setting of the specimen閃點檢測環和溫度傳感器一起組裝在測試搖臂上,加樣便捷
2. EASY OPERATION 操作簡單
Select a test mode and enter the expected flash point; while the instrument executes the test, you are free to do other lab work. The instrument follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the color LCD module.只需選好試驗模式,輸入預期閃點,儀器就嚴格按照標準自動進行測試,實驗結束蜂鳴報警,顯示試驗結果。
3. AUTO FIRE POINT DETECTION 自動燃點檢測
In addition to the flash point, fire point can be determined automatically. The fire point is detected when the double Ionization rings detects 5 sec of continuous burning
除閃點外,燃點也能自動檢測。樣品持續燃燒5秒,燃點確定。
4. AUTO FIRE CONTAINMENT 自動滅火
The fire containment lid activates automatically to help putting out fire when aco-8 detects a fire point or specimen is burning up heavily.
儀器檢測到燃點或樣品起火,滅火裝置動作,撲滅試驗火焰
5. DATA HANDLING 數據處理
The unit is equipped to store up to 200 test results and export to an optional printer or to a LIMS through an RS-232 port or USB memory.
試驗結果可以保存200個,試驗結果可以選購打印機打印,也可以通過USB, RS-232將數據導出到LIMS。
6. USB PORT USB接口
A USB port allows connecting USB keyboard for easy entering sample name and connecting USB flash memory for data copy to a PC or test conditions/parameters copy to the tester.
USB接口可以接USB鍵盤(選購件)用于樣品名稱的輸入,也可以接閃存copy試驗參數
6.PASSWORD PROTECTION 密碼保護
With setting up password by the administrator, the device is protected against inadvertent change of parameters by the operator.
試驗程序有密碼保護功能,可以防止誤操作
7. ALL-IN ONE DESIGN IN LIGHTWEIGHT 輕盈的一體式設計
The all-in-one design is much lighter than old model, ACO-7 by approximately 30%, which is world's smallest class in volume.
比ACO-7輕30%左右,也是全球體積*小的克利夫蘭開口杯法閃點試驗儀。
規格
TYPE 機型 | All –in one, microprocessor controlled 一體式設計,微處理器控制 |
TEST STANDARDS 試驗標準 | ISO 2592, ASTM D92, IP36 |
MEASURING RANGE測試范圍 | Ambient to 400℃ |
MEASUREMENT MODES 測試模式 | ISO CRM, ISO Normal, ISO SPE, ISO Flash & Fire, ISO Skim*, ASTM Normal, ASTM SPE, ASTM Flash & Fire, ASTM Skim*, and User custom *: asphalt version only |
HEATER 加熱部 | Nichrome Coil heater: 800W@220V 鎳鉻鐵加熱絲 |
COOLING DEVICE 冷卻裝置 | Forced air cooling by sirocco fan 強制風冷 |
DISPLAY 顯示 | 5.7 inch (117 x 88mm) color LCD with LED back light 彩色液晶顯示 |
TEMPERATURE SENSOR溫度傳感器 | PT-100 in stainless steel sheath 帶不銹鋼套的PT-100 |
FLASH DETECTOR 閃點檢測器 | Double Ionization Rings雙環形電極(火焰離子檢測) |
IGNITION SOURCE點火源 | Gas ignition with automatic lighting 氣點火 |
BAROMETRIC CORRECTION 大氣壓修正 | Automatic correction by built-in barometric pressure sensor 通過內置的壓力傳感器自動補正 |
I/O PORT 接口 | RS-232C = 1 channel (for PC or Optional Printer) USB=1 channel (for USB keyboard or USB Flash Memory) |
SAFETY SHUTDOWN 安全設置 | Automatically shuts off and the problem is reported by buzzer and display, in case: 以下情況儀器停止運行,同時蜂鳴報警,屏幕顯示 (a) EFP+30 oC or 400 oC is reached, 高于預設閃點20℃以上或超過370℃時 (b) temperature sensor is found defective, 溫度傳感器故障 (c) flash detector is found defective,閃點檢測傳感器故障 (d) thermofuse is blown (also fire containment lid activates),熱熔絲斷開 (e) built-in battery is found drained out,內置電池電能耗盡 (f) arm is not set in place, 檢測臂未到位 (g)control computer runs away (no display) 微機失控 |
GAS SUPPLY 氣源 | LP gas or natural gas (Max. pressure:10kPa) 液化氣或天然氣(不超過10kpa) |
POWER SUPPLY 電源 | 220/240 VAC, 50/60Hz |
POWER CONSUMPTION 功率 | **1000W |
ELECTRICITY CONSUMPTION 能耗 | 160Wh for 1 test (about 20 min), 60.48gCO2 (@ 0.378kgCO2/1kWh) |
AMBIENT TEMP. RANGE環境溫度 | 10°C to 35°C |
DIMENSIONS & WEIGHT 外形尺寸 | 230mm (W) × 470mm (D) × 390mm (H) 16kg |